PPM Meter, pH Meter & Combo Testers for Cannabis: 7 Compared
A ppm meter (also called an EC or TDS meter) shows how strong your nutrient solution is, a pH meter shows whether the plant can take the nutrients up. We compared three pH meters, two ppm/EC meters and two combo testers that measure both, by accuracy, calibration, temperature compensation and probe.
Advertising: As an Amazon Associate we earn from qualifying purchases. The product links to Amazon are affiliate links; your price does not change. This has no influence on the ranking.
Specs as of: October 8, 2026
The 3 pH meters at a glance
-
Best pH meter
Ad
1
Apera PH60 Premium pH Pocket Tester Kit
±0.01 pH · replaceable probe · ATC
- 1–3 point auto calibration
- Replaceable glass electrode
- Kit with calibration solutions
-
Ad
2
Bluelab pH Pen
±0.1 pH · double-junction probe · waterproof
- Fully waterproof, floats
- 30-day calibration reminder
- Made in New Zealand
-
Ad
3
Hanna HI98103 Checker pH Tester
±0.2 pH · 2-point auto calibration
- Compact, thin probe
- Coin cell lasts about 3000 hours
- No temperature compensation stated
The 2 ppm and EC meters at a glance
-
Best ppm meter
Ad
4
Bluelab Truncheon Nutrient Meter
EC, CF and ppm · no calibration needed
- Factory calibrated, waterproof
- Reads while you mix in the tank
- 5-year warranty
-
Ad
5
HM Digital TDS-3 Handheld TDS Meter
0–9,990 ppm · ±2% · built-in thermometer
- Hold function
- Carrying case with belt clip
- Classic pocket ppm meter
The 2 combo testers at a glance
-
Best combo tester
Ad
6
Apera PC60 5-in-1 pH/EC/TDS Pocket Tester
pH, EC, ppm, salinity, temp · one probe
- pH ±0.01, EC ±1% F.S.
- Replaceable multi-parameter probe
- Kit with calibration solutions
-
Ad
7
VIVOSUN Digital pH Meter + TDS/EC Meter Set
Two pens · pH 0–14 · TDS 0–9,990 ppm (listing)
- Separate pH pen and TDS/EC pen
- Calibration powders included
- Listing data only
We do not show prices because they change often. Check the current price, shipping and the exact pack size on the Amazon page.
pH meter, ppm meter or both?
pH meter: every grower needs one
The pH decides whether the roots can take up the nutrients at all. In coco and hydro the window is narrow, so a digital pH meter is the most important tool you buy. Target values per medium are in our pH calculator, and the basics of both values in our pH and EC meter guide.
PPM meter: for hydro, coco and feeding charts
A ppm or EC meter shows how strong your nutrient solution is. In hydro and coco you mix to a target value every time; in soil it helps you check the runoff for salt build-up. How to convert between EC and ppm shows our EC and ppm calculator.
Combo tester: one device, one probe
A combo tester saves a second device, but both readings depend on one probe. Separate meters let you replace only the part that wears out, which is almost always the pH electrode.
pH meters: all specs compared
Specs from the manufacturers' websites and manuals; values marked "listing" come only from the Amazon US listing (as of October 8, 2026). "Not stated" means we found no value for it.
| Spec | Best pH meter1. Apera PH60 | 2. Bluelab pH Pen | 3. Hanna Checker |
|---|---|---|---|
| Accuracy | ±0.01 pH | ±0.1 pH | ±0.2 pH |
| Range | -2.00 to 16.00 pH | 0 to 14 pH | 0.0 to 14.0 pH |
| Calibration | 1–3 points, automatic | 2 points, 30-day reminder | 1–2 points, automatic |
| Temperature compensation | Yes, 32–122 °F | Yes | Not stated |
| Probe | Replaceable glass electrode | Double junction, KCl gel | Fixed, thin tip |
| Waterproof | Yes | Yes, floats | Not stated |
| Offer | Amazon | Amazon | Amazon |
PPM and EC meters: all specs compared
Specs from the manufacturers' websites and manuals; values marked "listing" come only from the Amazon US listing (as of October 8, 2026). "Not stated" means we found no value for it.
| Spec | Best ppm meter4. Bluelab Truncheon | 5. HM Digital TDS-3 |
|---|---|---|
| Shows | EC, CF, ppm (500 and 700) | ppm (TDS), temperature |
| Range | 0.2–3.6 EC / 100–2,520 ppm | 0–9,990 ppm |
| Accuracy | Not stated | ±2% |
| Calibration | Not needed (factory calibrated) | Not stated |
| Temperature compensation | Yes | Not stated (thermometer built in) |
| Waterproof | Yes | Not stated |
| Offer | Amazon | Amazon |
pH and ppm combo testers: all specs compared
Specs from the manufacturers' websites and manuals; values marked "listing" come only from the Amazon US listing (as of October 8, 2026). "Not stated" means we found no value for it.
| Spec | Best combo tester6. Apera PC60 | 7. VIVOSUN Set |
|---|---|---|
| Measures | pH, EC, TDS, salinity, temperature | pH; TDS, EC, temperature (listing) |
| pH accuracy | ±0.01 pH | Not stated |
| EC/TDS accuracy | ±1% F.S. | ±2% (listing) |
| Temperature compensation | Yes, 32–122 °F | Not stated |
| Probe | Replaceable | Fixed (two pens) |
| Calibration supplies | Solutions included | 3 buffer powders (listing) |
| Offer | Amazon | Amazon |
Each pH meter in detail
1. Apera PH60 – precise, with a replaceable probe
Apera rates the PH60 at ±0.01 pH over a range of -2.00 to 16.00 pH, with automatic temperature compensation from 32 to 122 °F (0 to 50 °C). It calibrates automatically at one to three points and recognizes five buffer types. The glass electrode can be replaced, so the meter lives on when the probe wears out, which happens with every pH meter. The kit comes with calibration and storage solutions in a hard case.
- Highest stated accuracy
- Replaceable probe
- Complete kit with solutions
- Glass electrode needs careful handling
- Measures pH only
2. Bluelab pH Pen – rugged and made for growers
Bluelab builds the pH Pen for growers: 0 to 14 pH with ±0.1 accuracy, automatic temperature compensation and a KCl gel-filled double-junction probe that resists contamination. The pen is fully waterproof and floats if it falls into the reservoir. Two-point calibration is simple, and the display shows when the last calibration is 30 days old. Bluelab notes that readings in plain tap, RO or distilled water can be slow because there are few ions to measure.
- Robust, waterproof, floats
- Calibration reminder
- ±0.1 pH, less precise than the Apera
- Probe not replaceable
3. Hanna HI98103 Checker – the simple, compact tester
The Checker is Hanna's basic pH tester: 0.0 to 14.0 pH with 0.1 resolution and ±0.2 pH accuracy at 77 °F (25 °C). It calibrates automatically at one or two points and recognizes the buffers, and its coin cell runs about 3,000 hours. Temperature compensation is not stated, so measure at room temperature for the most reliable reading. Amazon showed limited stock at the time of our check.
- Small and simple
- Long battery life
- ±0.2 pH, the least precise here
- No ATC stated
Each ppm and EC meter in detail
4. Bluelab Truncheon – the ppm meter you never have to calibrate
The Truncheon is a long, waterproof wand you dip straight into the reservoir while you mix. It shows EC from 0.2 to 3.6, CF from 2 to 36 and ppm on both common scales (140 to 2,520 ppm at 700, 100 to 1,800 ppm at 500). Bluelab calibrates it at the factory, so you never need calibration solution, and it compensates for temperature automatically. There are no buttons; it switches off by itself. Bluelab gives a 5-year warranty.
- No calibration needed
- Both ppm scales plus EC and CF
- 5-year warranty
- Readings in steps, no decimals beyond 0.1 EC
- Long wand needs space
5. HM Digital TDS-3 – the classic pocket ppm meter
The TDS-3 is one of the most common ppm meters in the US: 0 to 9,990 ppm with 1 ppm resolution and ±2% readout accuracy according to the Amazon listing, plus a built-in thermometer and a hold function to freeze the reading. It comes in a carrying case with a belt clip and turns off after 10 minutes. Check which conversion factor it uses before you compare its ppm values with a feeding chart.
- Small and simple
- Wide range, 1 ppm resolution
- ppm only, no EC display stated
- Conversion factor not shown on the listing
Each combo tester in detail
6. Apera PC60 – pH and ppm in one pocket tester
The PC60 measures pH, EC, TDS (ppm), salinity and temperature with one replaceable probe. Apera states ±0.01 pH over -2.00 to 16.00 pH and ±1% of full scale for conductivity up to 20 mS/cm, with automatic temperature compensation from 32 to 122 °F (0 to 50 °C). A smiley icon shows when the reading is stable. If you want one device for both values, this is the most complete option here; you still calibrate pH and EC separately.
- One device for pH and ppm
- High stated accuracy
- Replaceable probe
- Two calibrations to keep up
- One probe for everything: if it fails, both readings are gone
7. VIVOSUN pH + TDS Set – two simple pens in one box
VIVOSUN's set combines a pH pen (0 to 14 pH) and a 3-in-1 TDS/EC/temperature pen (0 to 9,990 ppm, ±2%) with three calibration buffers, according to the Amazon listing. It is the most common entry set for growers. pH accuracy is not clearly stated on the listing, and cheap pH pens tend to drift, so calibrate often and replace the pen when it no longer calibrates.
- Both values with two pens
- Very common entry set
- pH accuracy not clearly stated
- Listing data only
PlantClue Finder: Which one fits you?
Answer a few quick questions about your grow and we show you the best match from this comparison – with the reasons and two alternatives.
How to buy the right ppm and pH meter
500 or 700 scale
ppm meters convert EC with a factor of 500 or 700, so the same solution can read 700 or 980 ppm. Use the scale your feeding chart uses, or work with EC, which is the same everywhere. More in our EC for cannabis guide.
Calibrate the pH meter often
Every pH electrode drifts. Calibrate with pH 7 and pH 4 solution every two to four weeks and store the probe moist in storage solution, never in plain water. A probe that no longer calibrates needs replacing.
Temperature compensation
Both pH and EC change with temperature. Meters with automatic temperature compensation (ATC) correct for that, which matters when your reservoir is colder or warmer than the room.
Adjust in small steps
Once you measure, you will adjust. Add pH Down or Up in small amounts, stir and measure again. The adjusters are compared in our pH Up and Down comparison.
How we compared the ppm and pH meters
This comparison is based on the manufacturers' websites, manuals and the Amazon US listings (October 2026), not a hands-on test: we did not measure reference solutions with these devices ourselves. Apera, Bluelab and Hanna data comes from their own product pages and manuals, HM Digital data from the product information shown on the listing; for the VIVOSUN set we found no detailed manufacturer page, so its values come from the listing and are marked as such. We ranked the meters within each group by stated accuracy, calibration and temperature compensation, probe and build, with at most two products per brand. Not included: Apera's PH20 and EC20 (Apera is already in twice), the Bluelab Combo Meter (Bluelab is already in twice), a permanent Bluelab monitor and calibration solutions sold on their own.
PPM meter and pH meter FAQ
What is the best ppm meter for cannabis?
In our comparison, the Bluelab Truncheon is the best ppm meter: it shows EC, CF and both ppm scales, needs no calibration and is waterproof. If you want ppm and pH in one device, the Apera PC60 is the best combo tester.
Where can I buy a ppm meter or pH meter?
All seven meters in this comparison are available on Amazon.com, and most are also sold in hydroponics stores and grow shops. Check accuracy, temperature compensation and whether calibration solution is included.
What is the best pH meter for cannabis?
In our comparison, the Apera PH60 is the best pH meter, with ±0.01 pH accuracy, automatic temperature compensation and a replaceable probe. The Bluelab pH Pen is the more rugged alternative for growers who want a waterproof pen.
Do I need a ppm meter for soil?
Not strictly. In soil you can follow the feeding schedule and watch the plants. A ppm meter still helps to check the runoff for salt build-up and to mix nutrients more consistently. In hydro and coco it is essential.
How often should I calibrate a pH meter?
Every two to four weeks with pH 7 and pH 4 solution, and always after a long break. Store the probe in storage solution. Some ppm meters, like the Bluelab Truncheon, are factory calibrated and need no calibration at all.
What is the difference between EC and ppm?
EC is the measured electrical conductivity of the solution. ppm is a conversion of that value, either with a factor of 500 or 700, depending on the meter. EC is the same on every meter, so it is the safer value to compare with feeding charts.
* Advertising / affiliate links: As an Amazon Associate we earn from qualifying purchases. There is no extra cost for you. Specs without guarantee, as of October 8, 2026.
