Thermometer Hygrometer for Grow Tents: 6 Monitors Compared
A thermometer hygrometer shows temperature and humidity in your grow tent, so you know when to run the exhaust fan, the humidifier or the dehumidifier. We compared six monitors for tents up to 4x4 ft, from a simple display to Bluetooth and WiFi sensors with alarms and a grow sensor that also shows VPD, by accuracy, connection and where you can place the sensor.
Advertising: As an Amazon Associate we earn from qualifying purchases. The product links to Amazon are affiliate links; your price does not change. This has no influence on the ranking.
Specs as of: November 18, 2026
The 6 grow tent thermometer hygrometers at a glance
-
Best overall
Ad
1
AC Infinity CLOUDCOM B1 Smart Thermo-Hygrometer
Bluetooth · 12 ft sensor probe · shows VPD
- Probe at canopy height, display outside the tent
- App with alarms, graphs and CSV export
- Accuracy not stated by the maker
-
Best WiFi monitor
Ad
2
Govee WiFi Thermometer Hygrometer H5179
WiFi + Bluetooth · ±0.54 °F · ±3% RH
- Check the tent from anywhere via WiFi
- App alerts outside your set range
- Data export up to 2 years
-
Ad
3
INKBIRD IBS-TH3-PLUS WiFi Hygrometer
WiFi without gateway · ±0.5 °F · ±3% RH (typical)
- Rechargeable battery
- High/low alerts in the app
- Works up to 122 °F (50 °C)
-
Ad
4
SwitchBot Thermometer Hygrometer (Meter)
Bluetooth · ±0.4 °F · ±2% RH
- Most accurate stated humidity reading here
- Data stored in the app
- WiFi only with a separate SwitchBot hub
-
Ad
5
TempPro TP50 Digital Hygrometer
Display only · ±1 °F · ±2–3% RH (listing)
- No app, no pairing, read it on the spot
- Shows highs and lows
- Simple spare for a drying room or curing
-
Ad
6
Elitech GSP-6 Data Logger with Detachable Probes
Data logger · ±0.9 °F · ±3% RH
- Separate temperature and humidity probes
- Stores 16,000 readings, alarm buzzer
- Built for cold-chain monitoring, more than most tents need
We do not show prices because they change often. Check the current price, shipping and the exact pack size on the Amazon page.
Display, Bluetooth or WiFi: which thermometer hygrometer fits?
Display only: cheap and simple
A plain display like the TempPro TP50 shows the current values plus highs and lows. That is enough if you check the tent every day anyway. You only see the numbers when you open the tent, though, and you get no warning while you are away.
Bluetooth: history on your phone
Bluetooth sensors like the SwitchBot Meter or the AC Infinity B1 store readings and show graphs in the app once your phone is in range. You see what happened during the night, for example a humidity spike after lights off. Alerts reach you only while your phone is nearby.
WiFi: alerts from anywhere
WiFi models like the Govee H5179 and the INKBIRD IBS-TH3-PLUS send alerts to your phone even when you are at work. Both need 2.4 GHz WiFi. Worth it if a failed fan or a hot day could push the tent out of range unnoticed. Which values to aim for shows our cannabis humidity levels guide.
Grow tent thermometers and hygrometers: all specs compared
Specs from the manufacturers' websites and manuals; values marked "listing" come only from the Amazon US listing (as of November 18, 2026). "Not stated" means we found no value for it.
| Spec | Best overall1. AC Infinity B1 | Best WiFi monitor2. Govee H5179 | 3. INKBIRD IBS-TH3-PLUS | 4. SwitchBot Meter | 5. TempPro TP50 | 6. Elitech GSP-6 |
|---|---|---|---|---|---|---|
| Accuracy | ||||||
| Temperature | Not stated | ±0.54 °F (±0.3 °C) | ±0.5 °F (±0.3 °C) typical | ±0.4 °F (±0.2 °C) at 32–149 °F | ±1 °F (listing) | ±0.9 °F (±0.5 °C) at -4 to 104 °F |
| Humidity | Not stated | ±3% RH | ±3% RH typical | ±2% RH at 10–90% | ±2–3% RH (listing) | ±3% RH at 20–90% |
| Connection and alerts | ||||||
| Connection | Bluetooth | 2.4 GHz WiFi + Bluetooth | 2.4 GHz WiFi, no gateway | Bluetooth (WiFi with SwitchBot hub) | None | USB to PC; Bluetooth per listing title |
| Alerts | App, phone in Bluetooth range | App, via WiFi | App, via WiFi | App, with hub for remote alerts | No | Buzzer on the device |
| Data history | Graphs, CSV export | 20 days online, export up to 2 years | Graphs in the app | Stored in the app | Highs and lows only | 16,000 readings, PC software |
| In the tent | ||||||
| VPD display | Yes | Not stated | Not stated | Not stated | No | No |
| Sensor on a cable | Yes, 12 ft (3.7 m) | No | No | No | No | Yes, detachable probes (length not stated) |
| Power | Battery (type not stated) | 3x AA, about 7 months | Rechargeable, 500 mAh | 2x AAA, about 1 year | 1x AAA | Rechargeable lithium + USB |
| Offer | Amazon | Amazon | Amazon | Amazon | Amazon | Amazon |
Each thermometer hygrometer in detail
1. AC Infinity CLOUDCOM B1 – the probe goes to the canopy, the display stays outside
The B1 is built for grow rooms: its temperature and humidity probe sits on a 12-foot (3.7 m) cable, so you can hang it at canopy height while the backlit display stays outside the tent. Besides temperature and humidity it shows VPD, the value that combines both. AC Infinity states a range of 16 to 194 °F and 0 to 100% RH. In the app you get alarms, graphs and a CSV export via Bluetooth, and you can calibrate the readings. AC Infinity does not publish an accuracy figure. The B2 version has the sensor built into the display instead of on a cable.
- Measures where the plants are, not at the tent wall
- Shows VPD directly
- Desktop, wall or magnetic mounting
- No published accuracy
- Bluetooth only, no alerts while you are away
Also check: our VPD calculator to see which VPD range fits your stage.
View on Amazon2. Govee WiFi Thermometer Hygrometer H5179 – alerts wherever you are
The H5179 connects to your 2.4 GHz WiFi, so you can check the tent and get alerts from anywhere. Govee states ±0.54 °F (±0.3 °C) and ±3% RH, a refresh every 2 seconds and three AA batteries that last about 7 months. The app keeps 20 days of data online and lets you export up to 2 years as a CSV file. You set the alert range in the app via Bluetooth; after that, out-of-range warnings reach you over WiFi.
- WiFi alerts without an extra hub
- Long data history with export
- No sensor on a cable
- No 5 GHz WiFi
3. INKBIRD IBS-TH3-PLUS WiFi – WiFi with a rechargeable battery
The IBS-TH3-PLUS WiFi connects directly to 2.4 GHz WiFi without a separate gateway and sends high and low alerts to the app. INKBIRD states a typical accuracy of ±0.5 °F (±0.3 °C) and ±3% RH, a range of 32 to 122 °F (0 to 50 °C) and 0 to 99% RH, a sample every 10 seconds and a 500 mAh rechargeable battery instead of disposable cells. The upper limit of 122 °F is no problem in a tent, but keep the sensor out of direct light.
- WiFi alerts, no gateway needed
- Rechargeable instead of AA/AAA cells
- Narrower temperature range than the others
- No sensor on a cable
4. SwitchBot Meter – the most precise humidity spec here
SwitchBot states ±0.4 °F (±0.2 °C) between 32 and 149 °F and ±2% RH between 10 and 90% RH, the tightest humidity figure in this comparison. The Meter collects data every 4 seconds, stores it in the app via Bluetooth and runs about a year on two AAA batteries. Remote access and alerts away from home need a SwitchBot hub, which is sold separately.
- ±2% RH, best stated humidity accuracy
- Long battery life
- WiFi and remote alerts only with a hub
- No sensor on a cable
5. TempPro TP50 – the simple display without an app
The TP50 is a plain digital display with temperature, humidity, a comfort icon and the highs and lows since the last reset. It used to be sold as the ThermoPro TP50; on Amazon US the brand and store now appear as TempPro. According to the Amazon listing, it reads to ±1 °F and ±2 to 3% RH and updates every 10 seconds. It runs on one AAA battery and has a stand and a magnet. We found no TempPro or ThermoPro product page with these specs, so the values come from the listing only.
- No app or pairing needed
- Handy as a second unit in a drying room
- No alerts, no history beyond highs and lows
- Listing data only
6. Elitech GSP-6 – a data logger with detachable probes
The GSP-6 comes from cold-chain and vaccine monitoring. It uses separate, detachable temperature and humidity probes, so the device can sit outside while the probes go inside. Elitech states -40 to 185 °F, ±0.9 °F (±0.5 °C) between -4 and 104 °F, 10 to 99% RH and ±3% RH between 20 and 90% RH. It stores 16,000 readings for the ElitechLog software and has an alarm buzzer. The Amazon title also names Bluetooth. For most tents it is more than you need, but it suits growers who want a long, exact record.
- Detachable probes, device outside the tent
- Large data memory
- Made for labs and fridges, more complex to set up
- No VPD, no WiFi alerts
PlantClue Finder: Which one fits you?
Answer a few quick questions about your grow and we show you the best match from this comparison – with the reasons and two alternatives.
How to buy the right thermometer hygrometer for your grow tent
Measure at canopy height
Temperature and humidity at the tent wall or floor can differ noticeably from the air around the leaves. Place the sensor at the height of the plant tops, in the shade, not right under the light. A probe on a cable makes that easy. Which temperatures fit each stage shows our cannabis grow temperature guide.
±2 to 3% RH is good enough
Budget sensors often differ by a few percent. For the grow tent that is fine as long as you watch the trend. For curing, where the target is 58 to 62% RH, a tighter spec or a quick salt test helps. More on that in our cannabis curing guide.
Alerts for the night
Most climate problems happen when you are not there: humidity climbs after lights off, or a fan fails on a hot day. A WiFi model sends the warning to your phone wherever you are. A Bluetooth model only shows it once you are back in range.
VPD saves you a calculation
VPD combines temperature and humidity into one number that tells you how strongly the plant transpires. Only the AC Infinity B1 shows it directly here. With the other monitors you can work it out in our VPD calculator.
How we compared the thermometer hygrometers
This comparison is based on the manufacturers' websites, manuals and the Amazon US listings (October 2026, availability and product names re-checked on November 18, 2026), not a hands-on test: we did not measure the devices side by side. AC Infinity, Govee, INKBIRD, SwitchBot and Elitech data comes from their own product or support pages and manuals. For the TempPro TP50 (formerly ThermoPro) we found no manufacturer page with specs, so its values come from the Amazon listing and are marked as such. We ranked the monitors by how well they fit a grow tent up to 4x4 ft (sensor placement, VPD, alerts), stated accuracy and data history, with at most two products per brand. Not included: a SensorPush sensor without a display and with limited stock, a SwitchBot remote-control hub, a Govee 3-pack of the Bluetooth H5075 (Govee is already in with the H5179) and other basic displays.
Thermometer hygrometer FAQ
What is the best thermometer hygrometer for a grow tent?
In our comparison, the AC Infinity CLOUDCOM B1 is the best overall pick for a grow tent: its sensor sits on a 12-foot cable at canopy height, and it shows VPD as well as temperature and humidity. If you want alerts while you are away, the Govee WiFi H5179 is the better choice.
Where can I buy a thermometer hygrometer?
All six monitors in this comparison are available on Amazon.com, and simple models are also sold in hardware stores and grow shops. Check the stated accuracy, whether you need WiFi alerts and whether the sensor can be placed at canopy height.
Where should I put the hygrometer in my grow tent?
At the height of the plant tops, in the shade of the leaves and not directly under the light or in the airflow of a fan. That way you measure the climate the plants actually feel instead of the warmer air at the top or the cooler air near the floor.
How accurate does a hygrometer need to be?
For the grow tent, ±2 to 3% RH is enough, because the trend matters more than a single reading. For curing, where you aim for 58 to 62% RH, it pays to check the sensor with a salt test or use a model with a tighter spec.
WiFi or Bluetooth hygrometer?
Bluetooth models store data and show it when your phone is nearby. WiFi models send alerts to your phone from anywhere, which is useful if humidity spikes at night or a fan fails while you are away. Both need a 2.4 GHz network or a phone in range to set them up.
Can I use one hygrometer for drying and curing too?
Yes. A small sensor can move from the tent to the drying room and later into a curing jar. Many growers keep a second, simple unit like the TempPro TP50 in the drying space so the tent stays monitored at the same time.
What temperature and humidity should a grow tent have?
As a rule of thumb: seedlings 72-79 °F at 65-70 % RH, veg 72-82 °F at 55-65 %, early flower 68-79 °F at 45-55 % and late flower 64-77 °F at 40-50 %. Keep night temperatures no more than about 10 °F lower. Our VPD calculator turns your thermometer and hygrometer readings into the matching VPD for each stage.
Is a grow tent monitor the same as a thermometer hygrometer?
Mostly, yes. "Grow tent monitor" usually means a WiFi thermometer hygrometer that logs temperature and humidity and sends alerts to your phone. Grow controllers go one step further and also switch fans or humidifiers. If you only want to read values, a display or Bluetooth model is enough; for alerts while you are away, pick WiFi (in our comparison the Govee H5179 or the INKBIRD IBS-TH3-PLUS).
* Advertising / affiliate links: As an Amazon Associate we earn from qualifying purchases. There is no extra cost for you. Specs without guarantee, as of November 18, 2026.
