Recommendations · Comparison

Clip Fan for Grow Tents: 6 Fans Compared

A clip fan keeps the air inside the grow tent moving. It breaks up humid pockets between the leaves, spreads the heat from the light and helps stems grow sturdier. You simply clamp it to a tent pole. We compared six clip fans for 2x2 to 4x4 ft tents, four oscillating clip fans and two with a fixed head, by size, airflow, speeds, oscillation, noise and controls.

Advertising: As an Amazon Associate we earn from qualifying purchases. The product links to Amazon are affiliate links; your price does not change. This has no influence on the ranking.

Specs as of: October 27, 2026

At a glance

The 4 oscillating clip fans at a glance

  1. Best overall Ad 1

    AC Infinity CLOUDRAY S6

    6 in · EC motor · auto oscillation

    • 10 speeds plus 10 dynamic wind modes
    • 90° oscillation in 10 levels, 31 dBA stated
    • App control only with a separate UIS controller
    View on Amazon
  2. Ad 2

    MARS HYDRO M6 6" Oscillating Clip Fan

    6 in · EC motor · auto oscillation (listing)

    • 10 speeds plus natural wind mode
    • Oscillation 45° or 90°
    • Below 32 dB stated (listing)
    View on Amazon
  3. For 4x4 tents Ad 3

    AC Infinity CLOUDRAY S9

    9 in · EC motor · auto oscillation

    • 601 CFM stated by the maker
    • 10 speeds, 10 oscillation levels
    • 35 dBA, IP-54
    View on Amazon
  4. Ad 4

    MARS HYDRO M6 Oscillating Clip Fan, 2-pack

    2 × 6 in · EC motor · auto oscillation (listing)

    • Two M6 fans in one pack
    • Oscillation 45° or 90°
    • App via iHub Pro (listing)
    View on Amazon
At a glance

The 2 fixed-head clip fans at a glance

  1. No-frills pick Ad 5

    Hurricane Classic Clip Fan 6"

    6 in · 14 W · 2 speeds

    • 306 CFM, 2,350 RPM on high
    • Adjustable tilt, spring clamp
    • 5 ft cord, 120 V
    View on Amazon
  2. Ad 6

    Active Air 8" Clip Fan, 7.5 W

    8 in · 7.5 W brushless · 1 speed (listing)

    • Head rotates 360° (listing)
    • Clips to flood tables and poles
    • 6 ft cord (listing)
    View on Amazon

We do not show prices because they change often. Check the current price, shipping and the exact pack size on the Amazon page.

Buying decision

Which clip fan fits your grow tent?

Circulation, not exhaust

A clip fan only moves the air inside the tent. Exhaust is a separate job: an inline fan with a carbon filter pulls warm, humid air out. How exhaust, intake and circulation work together is explained in our grow tent ventilation guide; inline fan kits are compared in our grow tent ventilation kits comparison.

Oscillating or fixed head

An oscillating clip fan sweeps across the canopy, so no area gets a constant blast and the leaves move gently everywhere. A fixed-head fan is simpler and works well aimed under the canopy or as a second fan next to an oscillating one.

Size by tent

For a 2x2 ft tent a 6-inch fan is enough. In a 2x4 or 4x4 ft tent, two 6-inch fans or one 9-inch fan such as the CLOUDRAY S9 spread the air more evenly. If you want app control, check which controller the fan needs: AC Infinity and MARS HYDRO both sell it separately.

Spec by spec

Oscillating clip fans: all specs compared

Specs from the manufacturer's website; values marked "listing" come only from the Amazon US listing (as of October 27, 2026). "Not stated" means we found no value for it. Airflow is given as the maker states it and is not measured by us.

Spec Best overall1. CLOUDRAY S6 2. MARS HYDRO M6 For 4x4 tents3. CLOUDRAY S9 4. MARS HYDRO M6 2-pack
Fan
Diameter 6 in 6 in (listing) 9 in 2 × 6 in (listing)
Power 11 W 10 W (listing) 11 W 10 W per fan (listing)
Speeds 10 + 10 dynamic wind modes 10 + natural wind (listing) 10 + 10 dynamic wind modes 10 + natural wind (listing)
Airflow (stated) 325 CFM 350 CFM (listing) 601 CFM 350 CFM per fan (listing)
Noise (stated) 31 dBA Below 32 dB (listing) 35 dBA Below 32 dB (listing)
Oscillation & control
Oscillation Auto, up to 90°, 10 levels Auto, 45° or 90° (listing) Auto, up to 90°, 10 levels Auto, 45° or 90° (listing)
Tilt 55° Not stated 55° Not stated
App / controller App only with UIS controller (sold separately) App via iHub Pro or iControl controller (listing) App only with UIS controller (sold separately) App via iHub Pro (listing)
Mounting & build
Clamp range Not stated Not stated Not stated Not stated
Cord length 8 ft (96 in) Not stated 8 ft (96 in) Not stated
Water resistance IP-54 Not stated ("weatherproof" in listing) IP-54 Not stated
Warranty 2 years Not stated 2 years Not stated
Data source Manufacturer Amazon listing Manufacturer Amazon listing
Offer Amazon Amazon Amazon Amazon
Spec by spec

Fixed-head clip fans: all specs compared

Specs from the manufacturer's website; values marked "listing" come only from the Amazon US listing (as of October 27, 2026). "Not stated" means we found no value for it. Airflow is given as the maker states it and is not measured by us.

Spec No-frills pick5. Hurricane Classic 6 6. Active Air 8
Fan
Diameter 6 in 8 in
Power 14 W 7.5 W (maker page title: 10 W)
Speeds 2 1 (listing)
Airflow (stated) 306 CFM Not stated
Noise (stated) Not stated Not stated
Oscillation & control
Oscillation None None
Tilt / aim Adjustable tilt Head rotates 360° (listing)
App / controller None, switch on the fan Works with a fan speed controller (listing)
Mounting & build
Clamp range Not stated (spring clamp) Not stated
Cord length 5 ft 6 ft (listing)
Water resistance Not stated Not stated
Warranty Not stated Not stated
Data source Manufacturer Manufacturer + Amazon listing
Offer Amazon Amazon
In detail

Each oscillating clip fan in detail

Best overall Ad

1. AC Infinity CLOUDRAY S6 – the most settings and the clearest specs

The CLOUDRAY S6 uses a brushless EC motor with dual ball bearings and, according to AC Infinity, moves up to 325 CFM at 11 W and 31 dBA. You get 10 speeds, 10 dynamic wind modes that vary the airflow, and an oscillation range of up to 90° that you can narrow in 10 levels so the fan does not blow into the tent wall. The head tilts 55°, the cord is 8 ft long and the fan is rated IP-54. On its own it is controlled at the fan; app control, timers and climate triggers need one of AC Infinity's UIS controllers. If you do not need oscillation, the CLOUDRAY A6 is the same fan with a manually adjustable head.

  • Clear manufacturer specs including noise and cord length
  • Oscillation range adjustable in 10 levels
  • IP-54 and a 2-year warranty
  • App and automation only with an extra controller
  • Clamp range not stated

Note: the Amazon listing states 315 CFM and 8 W; we use the manufacturer's values.

View on Amazon
Ad

2. MARS HYDRO M6 – oscillating with two fixed angles

The upgraded M6 clip fan from MARS HYDRO has an EC motor, 10 speeds and a natural wind mode, according to the Amazon listing. You choose between a 45° and a 90° oscillation angle: the smaller angle suits a 2x2 ft tent, the wider one reaches more of a 2x4 or 4x4. The listing states up to 350 CFM, a noise level below 32 dB and a motor life of 50,000 hours. App control runs through a MARS HYDRO iHub Pro or iControl controller. All values come from the listing; we found no manufacturer page for this model, and the technical table in the listing contradicts the bullet points in places.

  • Two oscillation angles to fit the tent
  • Natural wind mode
  • Low noise stated
  • Listing data only, partly contradictory
  • Cord length, clamp range and warranty not stated
  • App only with a MARS HYDRO controller
View on Amazon
For 4x4 tents Ad

3. AC Infinity CLOUDRAY S9 – the larger fan for a 4x4 tent

The S9 is the 9-inch version of the S6, with the same controls: 10 speeds, 10 dynamic wind modes, up to 90° oscillation in 10 levels and a 55° tilt. AC Infinity states 601 CFM at 11 W and 35 dBA, an 8 ft cord and IP-54. It makes sense in a 4x4 ft tent, where one larger fan above the canopy can do the work of two small ones; in a 2x2 tent it is usually too much. Like the S6, it needs a UIS controller for app control.

  • The most airflow in this comparison
  • Same fine oscillation control as the S6
  • 2-year warranty
  • Bulky for small tents
  • Amazon listing states only 520 CFM
  • App and automation only with an extra controller
View on Amazon
Ad

4. MARS HYDRO M6 2-pack – two fans for a 2x4 or 4x4 tent

This pack contains two of the M6 fans described above, with the same values from the listing: 10 speeds, natural wind mode, 45° or 90° oscillation, up to 350 CFM and below 32 dB per fan. Two 6-inch fans in opposite corners move air above and below the canopy more evenly in a 2x4 or 4x4 ft tent than one fan from a single side. App control runs through the MARS HYDRO iHub Pro.

  • Two fans for larger tents
  • Same settings as the single M6
  • Listing data only
  • Cord length, clamp range and warranty not stated
View on Amazon
In detail

Each fixed-head clip fan in detail

No-frills pick Ad

5. Hurricane Classic 6" – the plain clip fan from Hydrofarm

Hydrofarm's Hurricane Classic is a basic clip fan with two speeds, a tilting head and a spring clamp. Hydrofarm states 306 CFM at 2,350 RPM on high and 14 W, with a 5 ft cord for 120 V outlets. It does not oscillate, so you aim it once, usually across the canopy or under it. Noise level and warranty are not stated. It suits growers who want a simple fan without app or controller, or a second fan below the canopy next to an oscillating one.

  • Simple, no settings to manage
  • Manufacturer airflow and RPM stated
  • No oscillation
  • Noise level and warranty not stated
  • Higher power draw than the EC fans
View on Amazon
Ad

6. Active Air 8" – low power, one speed

The Active Air clip fan, also from Hydrofarm, has an 8-inch head and a 7.5 W brushless motor; the title of Hydrofarm's page says 10 W, the text and the Amazon listing say 7.5 W. According to the listing it runs at one speed, the head rotates 360° and the cord is 6 ft long; it can be hooked up to a fan speed controller. Hydrofarm describes it for clipping to flood tables to move air under the foliage. Airflow, noise and warranty are not stated.

  • Low power draw
  • Head can be aimed in any direction
  • Only one speed without a separate controller
  • No oscillation
  • Airflow, noise and warranty not stated
View on Amazon
Buying guide

How to buy the right clip fan

How many fans per tent

As a starting point: one 6-inch clip fan in a 2x2 ft tent, one or two in a 2x4 ft tent (two when the canopy is dense), and two 6-inch fans or one 9-inch fan in a 4x4 ft tent, ideally one above and one below the canopy. Plant density, the light and your exhaust change this, so watch the leaves: they should move gently, not flap.

Placement and wind strength

Do not aim the fan straight at one plant at full speed; constant strong wind can dry and damage the leaves. Point it across the canopy or let it oscillate, and use a lower speed for seedlings and clones.

Clamp and tent poles

None of the makers in this comparison states the clamp range. Most grow tent poles are thin enough for a standard clip, but check the pole diameter of your tent and the product photos before you buy. A level setup is covered in our grow tent setup for beginners.

Climate decides, the fan helps

Circulation evens out temperature and humidity, but it does not lower them. Check the values with a hygrometer (see our thermometer and hygrometer comparison), keep an eye on cannabis humidity levels and the grow temperature guide, and use a dehumidifier if the air stays too humid (see our grow tent dehumidifier comparison).

How we compared the clip fans

This comparison is based on the manufacturers' websites and the Amazon US listings (October 2026), not a hands-on test: we did not run these fans in our own tents. AC Infinity and Hydrofarm data come from their own product pages; for the MARS HYDRO M6 we found no manufacturer page, so its values come from the listing and are marked as such. Where the listing and the maker differ, we use the maker's value and say so. We ranked the fans by how well they suit a grow tent from 2x2 to 4x4 ft (oscillation, speeds, controls, build) and how clearly the specs are stated, with at most two products per brand. Not included: VIVOSUN AeroWave fans (unavailable or only sold in bundles at the time of our check), Spider Farmer (clip fan only in bundles on Amazon.com), the AC Infinity CLOUDRAY A6 (same fan as the S6 without oscillation, mentioned in the text) and household clip fans without grow-tent features.

FAQ

Clip fan FAQ

What is the best clip fan for a grow tent?

In our comparison, the AC Infinity CLOUDRAY S6 is the best overall clip fan for a grow tent: a 6-inch EC fan with 10 speeds, oscillation adjustable in 10 levels, 31 dBA and IP-54 according to the maker. For a 4x4 ft tent, the 9-inch CLOUDRAY S9 or two MARS HYDRO M6 fans spread the air more evenly.

How many clip fans do I need in a grow tent?

As a rule of thumb, one 6-inch clip fan in a 2x2 ft tent, one or two in a 2x4 ft tent and two 6-inch fans or one 9-inch fan in a 4x4 ft tent. Dense canopies need more air movement; the leaves should move gently everywhere.

Is an oscillating clip fan better than a fixed one?

In most tents, yes. An oscillating clip fan sweeps across the canopy, so the air moves everywhere and no plant gets a constant blast. A fixed-head fan is fine aimed under the canopy or as a second fan.

Where should I put a clip fan in a grow tent?

Clamp it to a corner pole and point it across the canopy rather than straight at the plants. In larger tents, a second fan below the canopy helps against humid air between the lower leaves.

Does a clip fan replace an exhaust fan?

No. A clip fan only circulates the air inside the tent. You still need an exhaust fan, usually an inline fan with a carbon filter, to remove heat, humidity and odor. Both work together.

Should a clip fan run all the time?

Many growers run their clip fans around the clock, at least while the light is on. At night, gentle circulation also helps against humid pockets, so a low speed is usually better than switching it off.

* Advertising / affiliate links: As an Amazon Associate we earn from qualifying purchases. There is no extra cost for you. Specs without guarantee, as of October 27, 2026.